用户手册 安装、首次启动、操作。 RadioFoundry 用户手册简介安装首次启动为电台编程按键与导航主屏幕信道、区域与 VFOFMDMR消息、呼叫提示与电台检查紧急扫描与双守候APRS热点模式USB 网络模式电池与供电设置从原厂 MD-380 固件迁移从原厂 DM-32UV 固件迁移故障排查常见问题术语表电台参考
开发者指南 构建、架构、添加电台、发布。 Developer DocumentationAdding a ModeAdding a RadioArchitectureThe Board RegistryBuildingCI Runners and ImagesContinuous IntegrationThe CodecThe Codeplug EditorContributingCPS, Codeplug and SettingsDebug LinkDeveloper glossaryThe User Manual PDFReleasesStack CheckTestingTranslatingThe Web FlasherThe Web Site
规范 行为、硬件参数和协议。 SpecificationsAir interfaceAir band AM receive and broadcast FM receiveAPRSCapabilitiesChannel modesDM-1701: hosting the AMBE+2 codecDM-1801 Pro: the AMBE+2 codec and how it is calledDM-32UV: hosting the AMBE+2 codecMD-380: hosting the AMBE+2 codecMD-9600: hosting the AMBE+2 codecMD-UV380 / MD-UV390: hosting the AMBE+2 codecCodec placement: moving the stock codec to where RadioFoundry wants itNative codeplug (draft)Codeplug port: vendor codeplug to RadioFoundryCodeplug settings areaStock TYT-family codeplugsFast codeplug protocolCPS protocolCrash logUSB debug linkDM-32UV flashing and migration from the vendor firmwareDM-32UV stock codeplugDM-32UV vendor programming protocol (interop facts)DMR data servicesDMR emergencyDMR modem behavior and the `dmr_modem` HAL contractDMR repeater roamingDMR Tier III in the codeplugDMR Tier III trunking (mobile station)DMR voice callsGotchas: DMR modem and radio bring-upAnytone AT-D868UV / AT-D878UV / AT-D578UV hardwareRadioddity DB25-D PRO hardwareBaofeng DM-1701 hardware (and its STM32 siblings)Baofeng DM-1801 Pro hardwareBaofeng DM-32UV hardwareRadioddity GD-88 (Kydera DR-880UV) hardwareTYT MD-380 hardware (MD-390, Retevis RT3, and the "G" GPS models)TYT MD-9600 / Retevis RT90 hardware (mobile)TYT MD-UV380 hardware (MD-UV390, Retevis RT3S, MD-UV390 Plus 10 W)Retevis RT10 hardwareCHIRP image of the Baofeng UV-5RHR_C6000 register referenceCompact DMR ID database (format C)MD-380 migration from stock firmwaremDNS and DNS-SD on the USB network linkThe MMDVM modem protocol, as a DMR-only radio must speak itHR_C6000 as a DMR modemHR_C7000 as a DMR modemNOR-like sectors over NANDNXDN in the codeplugNXDNOpen-firmware CPS interoperabilityP25 in the codeplugP25 trunkingP25DMR PA key-upPositionPPP on the serial host linkqdmr YAML codeplugEveryday radio featuresRadios: hardware survey and port planThe second receiver's linkSettings store and safe flash writesSingle frequency repeater (SFR)SNMP agentSplit duplex repeater (two radios as one duplex MMDVM modem)Stub entrySTM32F4 flash stubSupport infoTCP services on the USB network linkTFTP codeplug access on the USB network linkThe user interfaceAnalog and DMR voice over USB: feasibility and designUSB network personality and the IP gatewayHardware watchdogZone sharing over DMR data
测试 测试计划、测试台搭建和空口覆盖。 TestingBring-up resultsBacklight curveDM-1801 Pro bring-up checklistDM-32UV bring-up checklistDMR bench testing on the SDR benchMD-380 bring-up checklistMD-9600 bring-up checklistMD-UV380 bring-up checklistMMDVM implementation audit (2d45a21)On-air test coverageTransmit power calibration with a wattmeter
用户体验 UI 原则、流程和屏幕图库。 WireframesDual watchInformation architectureUI design principlesUI survey: what good radio and device interfaces doTask flowsUsability test protocol128x64 monochrome160x128 color240x320 color (portrait)