Retevis RT10
Supported
- Also sold as
- —
- Type
- Handheld
- Bands
- 902-928 MHz
- Power
- L / H
- Processor
- HR_C7000
- Screen
- None
- Voltage reading
- Battery
- Clock kept when off
- No, only while on
Features
| Feature | Full | Amateur | Commercial |
|---|---|---|---|
| Network (USB network adapter and IP over DMR) | |||
Leave network mode from a web pageUSB_SERIAL_REQUEST | left out | left out | left out |
IP over DMR gatewayDMR_IP_GATEWAY | left out | left out | left out |
Minimal TCPNET_TCP | left out | left out | left out |
KISS over TCP, port 8001NET_KISS | left out | left out | left out |
HTTP status page and JSON, port 80NET_HTTP | left out | left out | left out |
HTTP static files stored and served gzip compressedNET_HTTP_GZIP | left out | left out | left out |
Web control: the front panel page, keys, status and receive audio over /wsNET_WEBCTL | left out | left out | left out |
Zone and channel control over UDP, port 4191: where the radio is, select and step, change noticesNET_RADIO_UDP | left out | left out | left out |
rigctld, port 4532NET_RIGCTL | left out | left out | left out |
APRS-IS clientNET_APRSIS | left out | left out | left out |
Audio linking (USRP over UDP, port 34001)NET_USRP | not written for this radio yet | not written for this radio yet | not written for this radio yet |
mDNS / DNS-SD (rfoundry-<id>.local)MDNS | left out | left out | left out |
TFTP codeplug read / writeTFTP | left out | left out | left out |
DMR ID database over TFTP (iddb.bin, combined codeplug.bin)TFTP_IDDB | left out | left out | left out |
Compact DMR ID database (format C) read beside format NIDDB_COMPACT | included | included | included |
Control station mode (boot as network, PC answers data, fixed link)DMR_CONTROL_STATION | left out | left out | left out |
SNMP v2c agent and traps (USB and over the air)SNMP | left out | left out | left out |
PPP on the serial host port (IPv4 into the gateway)NET_PPP | left out | left out | left out |
| Radio and voice | |||
Analog FM receive and transmitFM | included | included | included |
CTCSS / DCS encode and decodeSUBTONE | included | included | included |
DMR Tier II voice (modem, call stack, AMBE FEC, vocoder)DMR | included | included | included |
Basic privacy (Motorola / Anytone BP)DMR_PRIVACY | included | left out | included |
Talker alias receive and sendDMR_TALKER_ALIAS | included | included | included |
ETSI GPS Info in the embedded LCDMR_GPS | left out | left out | left out |
CSBK signaling: call alert, radio checkDMR_SIGNALING | included | included | included |
DMR emergency (alarm, emergency call, hot mic)DMR_EMERGENCY | included | included | included |
Repeater roamingDMR_ROAMING | included | included | included |
Tier III trunked systems: control channel, registration, following callsDMR_TRUNK | included | included | included |
Trunked calls and services: voice, status, short data, packet data, authenticationDMR_TRUNK_TX | included | included | included |
Trunked supplementary data and the short data pollDMR_TRUNK_SUPL | included | included | included |
Trunked calls through a system's telephone, line and dispatcher gateways: dialed digits sent with the callDMR_TRUNK_GW | included | included | included |
Scan, band scan, dual watch, nuisance deleteSCAN | included | included | included |
Beeps and alert tonesBEEP | included | included | included |
Signaling tone chains (Settings > Signaling tones)SIG_TONES | included | included | included |
FM TX tones: roger beep, 1750 Hz burstFM_TX_TONES | included | included | included |
Receive past the rated bands, Settings > AdvancedRX_EXT | included | included | included |
FM VOXVOX | not written for this radio yet | not written for this radio yet | not written for this radio yet |
Frequency trim, Settings > AdvancedREF_TRIM | included | included | included |
Receiver battery saverBATTERY_SAVE | included | included | included |
Key assignment (Settings > Keys, codeplug)KEY_ASSIGN | included | included | included |
Volume bar when a knob the MCU reads turns (#354)VOLUME_BAR | included | included | included |
P25 channels in the codeplug: the conventional codecP25 | included | included | included |
P25 trunked systems in the codeplug: the codecP25_TRUNK | included | included | included |
NXDN conventional voice, 4800 and 9600 bit/s: the frame codec, receive, the call layer, the engine and the NXDN mode in the radio coreNXDN | included | included | included |
NXDN Scrambler (15-bit)NXDN_SCRAMBLER | included | left out | included |
| DMR data | |||
ARS registrationDMR_ARS | included | left out | included |
LRRP locationDMR_LRRP | left out | left out | left out |
Compressed UDP/IP headers on transmit (SAP 3)DMR_UDP_COMPRESS | included | included | included |
Single frequency repeater: MMDVM SFR, and the standalone SFR (experimental)SFR | included | included | included |
Experimental: SFR user receive "dual-path RX": a voice frame whose FEC failed comes from the other copySFR_DUALPATH_RX | included | included | included |
Experimental: standalone SFR repeater's periodic CW ID (callsign in Morse, FM)SFR_CWID | included | included | included |
APRS: AFSK positions, status, messages; DMR positions; KISS TNCAPRS | included | included | left out |
APRS on FM: AX.25 / AFSK packets, messages, KISS TNCAPRS_AFSK | included | included | left out |
APRS over DMR: LRRP or UDT positions to a gateway IDAPRS_DMR | included | included | left out |
APRS receive: demodulator, station list, digipeaterAPRS_RX | included | included | left out |
APRS iGate rules (with tools/aprs_gate.py)APRS_IGATE | included | included | left out |
| Host link and USB | |||
Task stacks in the debug link viewTASK_STACKS | included | included | included |
Host link: hotspot, CPS, debug link on the host portHOSTLINK | included | included | included |
MMDVM hotspotHOTSPOT | left out | left out | left out |
Split duplex repeater (two radios, one duplex modem)HOTSPOT_SPLIT | not written for this radio yet | not written for this radio yet | not written for this radio yet |
Debug linkDEBUGLINK | included | included | included |
Open-firmware CPS protocol (qdmr)CPS_OPENFW | included | included | included |
Fast codeplug protocol (debug link CODEPLUG)CPS_FAST | included | included | included |
Loader hand-over (stub entry, command 0x1A)STUB_ENTRY | included | included | included |
Crash logCRASH_LOG | included | included | included |
Hardware watchdogWATCHDOG | included | included | included |
Fault trace on the host UARTFAULT_TRACE | included | included | included |
| User interface | |||
French on the radioLANG_FR | left out | left out | left out |
Start in FrenchLANG_DEFAULT_FR | left out | left out | left out |
Support info on About and the debug link (build source, chips, image hash)SUPPORT_INFO | included | included | included |
● included · ○ left out
Not available on this radio: Text messages (ETSI IP text by default), Motorola TMS text format, Zone and channel sharing: send a zone or a channel, import an offered one, USB device, USB network adapter (CDC-NCM), VFO (hand-tuned frequency), FM VFO, DMR VFO (color code, slot, talk target typed in; mode change FM / DMR), Diagnostics page, Backlight test pages, 16x32 font, Anti-aliased fonts, Larger text, Spanish on the radio, Italian on the radio, Chinese on the radio, Start in Spanish, Start in Italian, Start in Chinese, Color screen settings (theme, highlight color, filled status bar), Settings menu on the radio, Dual watch: A and B in any zone or the VFO, PTT on the selected one, its screens, talk back, DTMF transmit from the keys, Vibration alerts (Settings > Sound > Vibrate), GPS receiver: the module driver and its NMEA input (Settings > Location > GPS), Settings and codeplug storage on SPI NAND, Crash log screen, Crash report over DMR, Air band AM receive (108-137 MHz), Broadcast FM receiver, GPS screen: sky plot, signal bars, grid locator (Tools > Position), Channels list: every channel by number, a channel's settings (hub 5), Channel editor: edit a channel, New channel from current settings, text entry, Zone editor: move, add, copy and remove channels in a zone; rename, copy and delete a zone, Contact editor: a new contact from Find or a call's actions (name, ID, type, timeslot)
Entering Update Mode
- Connect the programming cable to the radio and to the computer.
- Open the radio programming utility and choose the cable. A radio that already runs RadioFoundry is detected without holding keys or turning it off.
- Otherwise, turn the radio off and on again when prompted. Do not hold any keys. The screen stays dark and the LED on top blinks yellow while the radio is in update mode.