RadioFoundry
IT
Baofeng DM-32UV
Scegli una schermata qui sotto per mostrarla qui.

Radio

Baofeng DM-32UV

Supportata

FM and DMR voice both ways, CTCSS/DCS, APRS both ways, GPS data, the hotspot and each split duplex half work on air. Open: FM deviation at 12.5 kHz and an outdoor GPS fix.
Venduta anche come
—
Tipo
Portatile
Bande
136-174 / 400-480 MHz · AM banda aerea 108-137 MHz · FM broadcast 87-108 MHz
Potenza
1 / 5 W
Processore
HR_C7000
Schermo
color, 240 × 320
Lettura della tensione
Batteria
Orologio mantenuto da spenta
Sì (pila di riserva)

Installa su questa radio

Schermate

Home, canale DMR
Ricezione di una chiamata di gruppo
Doppio ascolto: A e B, PTT su A
Ogni canale per numero
Lettura di un messaggio
Impostazioni

Tutte le schermate di questa radio →

Funzioni

FunzioneFullAmateurCommercial
Radio and voice
Analog FM receive and transmitFMinclusainclusainclusa
CTCSS / DCS encode and decodeSUBTONEinclusainclusainclusa
DMR Tier II voice (modem, call stack, AMBE FEC, vocoder)DMRinclusainclusainclusa
Basic privacy (Motorola / Anytone BP)DMR_PRIVACYinclusaesclusainclusa
Talker alias receive and sendDMR_TALKER_ALIASinclusainclusainclusa
ETSI GPS Info in the embedded LCDMR_GPSinclusainclusainclusa
CSBK signaling: call alert, radio checkDMR_SIGNALINGinclusainclusainclusa
DMR emergency (alarm, emergency call, hot mic)DMR_EMERGENCYinclusainclusainclusa
Repeater roamingDMR_ROAMINGinclusainclusainclusa
VFO (hand-tuned frequency)VFOinclusainclusainclusa
FM VFOVFO_FMinclusainclusainclusa
DMR VFO (color code, slot, talk target typed in; mode change FM / DMR)VFO_DMRinclusainclusainclusa
Scan, band scan, dual watch, nuisance deleteSCANinclusainclusainclusa
Dual watch: A and B in any zone or the VFO, PTT on the selected one, its screens, talk backDUAL_WATCHinclusainclusainclusa
Beeps and alert tonesBEEPinclusainclusainclusa
FM TX tones: roger beep, 1750 Hz burstFM_TX_TONESinclusainclusainclusa
DTMF transmit from the keysDTMFinclusainclusainclusa
FM VOXVOXnon ancora scritta per questa radionon ancora scritta per questa radionon ancora scritta per questa radio
Frequency trim, Settings > AdvancedREF_TRIMinclusainclusainclusa
Receiver battery saverBATTERY_SAVEinclusainclusainclusa
Vibration alerts (Settings > Sound > Vibrate)VIBRATEesclusaesclusaesclusa
GPS receiver: the module driver and its NMEA input (Settings > Location > GPS)GPSinclusainclusainclusa
Air band AM receive (108-137 MHz)AM_RXinclusainclusainclusa
Broadcast FM receiverBCAST_FMinclusainclusainclusa
Key assignment (Settings > Keys, codeplug)KEY_ASSIGNinclusainclusainclusa
Channels list: every channel by number, a channel's settings (hub 5)CHANNEL_LISTinclusainclusainclusa
Channel editor: edit a channel, New channel from current settings, text entryCHANNEL_EDITinclusainclusainclusa
Zone editor: move, add, copy and remove channels in a zone; rename, copy and delete a zoneZONE_EDITinclusainclusainclusa
Contact editor: a new contact from Find or a call's actions (name, ID, type, timeslot)CONTACT_EDITinclusainclusainclusa
Volume bar when a knob the MCU reads turns (#354)VOLUME_BARinclusainclusainclusa
DMR data
Text messages (ETSI IP text by default)DMR_SMSinclusainclusainclusa
Motorola TMS text formatDMR_TMSinclusaesclusainclusa
ARS registrationDMR_ARSinclusaesclusainclusa
LRRP locationDMR_LRRPinclusaesclusainclusa
Zone and channel sharing: send a zone or a channel, import an offered oneZONE_SHAREinclusainclusainclusa
Compressed UDP/IP headers on transmit (SAP 3)DMR_UDP_COMPRESSinclusainclusainclusa
Single frequency repeater: MMDVM SFR, and the standalone SFR (experimental)SFRinclusainclusainclusa
Experimental: SFR user receive "dual-path RX": a voice frame whose FEC failed comes from the other copySFR_DUALPATH_RXinclusainclusainclusa
Experimental: standalone SFR repeater's periodic CW ID (callsign in Morse, FM)SFR_CWIDinclusainclusainclusa
APRS: AFSK positions, status, messages; DMR positions; KISS TNCAPRSinclusainclusaesclusa
APRS receive: demodulator, station list, digipeaterAPRS_RXinclusainclusaesclusa
APRS iGate rules (with tools/aprs_gate.py)APRS_IGATEinclusainclusaesclusa
GPS screen: sky plot, signal bars, grid locator (Tools > Position)GPS_SKYinclusainclusaesclusa
Network (USB network adapter and IP over DMR)
IP over DMR gatewayDMR_IP_GATEWAYinclusainclusainclusa
Minimal TCPNET_TCPinclusainclusainclusa
KISS over TCP, port 8001NET_KISSinclusainclusaesclusa
HTTP status page and JSON, port 80NET_HTTPinclusainclusainclusa
HTTP static files stored and served gzip compressedNET_HTTP_GZIPinclusainclusainclusa
Web control: the front panel page, keys, status and receive audio over /wsNET_WEBCTLinclusainclusainclusa
rigctld, port 4532NET_RIGCTLinclusainclusainclusa
APRS-IS clientNET_APRSISinclusainclusaesclusa
Audio linking (USRP over UDP, port 34001)NET_USRPinclusainclusainclusa
mDNS / DNS-SD (rfoundry-<id>.local)MDNSinclusainclusainclusa
TFTP codeplug read / writeTFTPinclusainclusainclusa
DMR ID database over TFTP (iddb.bin, combined codeplug.bin)TFTP_IDDBinclusainclusainclusa
Compact DMR ID database (format C) read beside format NIDDB_COMPACTinclusainclusainclusa
Control station mode (boot as network, PC answers data, fixed link)DMR_CONTROL_STATIONinclusaesclusainclusa
SNMP v2c agent and traps (USB and over the air)SNMPinclusaesclusainclusa
PPP on the serial host port (IPv4 into the gateway)NET_PPPinclusainclusainclusa
Host link and USB
Task stacks in the debug link viewTASK_STACKSinclusainclusainclusa
Host link: hotspot, CPS, debug link on the host portHOSTLINKinclusainclusainclusa
MMDVM hotspotHOTSPOTinclusainclusaesclusa
Split duplex repeater (two radios, one duplex modem)HOTSPOT_SPLITinclusainclusaesclusa
Debug linkDEBUGLINKinclusainclusainclusa
Open-firmware CPS protocol (qdmr)CPS_OPENFWinclusainclusainclusa
Fast codeplug protocol (debug link CODEPLUG)CPS_FASTinclusainclusainclusa
Loader hand-over (stub entry, command 0x1A)STUB_ENTRYinclusainclusainclusa
Crash logCRASH_LOGinclusainclusainclusa
Crash log screenCRASH_SCREENinclusainclusainclusa
Crash report over DMRCRASH_REPORTinclusainclusainclusa
Hardware watchdogWATCHDOGinclusainclusainclusa
Fault trace on the host UARTFAULT_TRACEinclusainclusainclusa
User interface
Diagnostics pageDIAGinclusainclusainclusa
16x32 fontFONT_XLinclusainclusainclusa
Anti-aliased fontsFONT_AAinclusainclusainclusa
Larger textFONT_BIGinclusainclusainclusa
Spanish on the radioLANG_ESinclusainclusainclusa
Italian on the radioLANG_ITesclusaesclusaesclusa
Start in SpanishLANG_DEFAULT_ESesclusaesclusaesclusa
Start in ItalianLANG_DEFAULT_ITesclusaesclusaesclusa
Color screen settings (theme, highlight color, filled status bar)UI_COLORinclusainclusainclusa
Settings menu on the radioUI_SETTINGSinclusainclusainclusa

● inclusa · ○ esclusa

Non disponibile su questa radio: USB device, USB network adapter (CDC-NCM), Settings and codeplug storage on SPI NAND

Entrare in modalità aggiornamento

  1. Collega il cavo di programmazione alla radio e al computer.
  2. Apri l'utility di programmazione e scegli il cavo. Una radio che esegue già RadioFoundry viene rilevata senza tenere premuti tasti né spegnerla.
  3. Altrimenti, spegni e riaccendi la radio quando richiesto. Non tenere premuti tasti. Lo schermo resta buio e il LED in alto lampeggia di giallo mentre la radio è in modalità aggiornamento.

Documentazione