Esta página aún no está traducida; se muestra en inglés.
CHIRP image of the Baofeng UV-5R
The layout site/static/js/codeplug/chirp_img.js reads. It was learned from one .img and the CSV CHIRP wrote from
it, by matching each CSV row to the bytes; CHIRP's source was not read. Only what that pair confirms is listed.
An image is the radio's memory, then a footer. All values are little endian.
Footer
At offset 0x194A: the bytes 63 68 69 72 70 EE 69 6D 67 00 ("chirp", 0xEE, "img", 0), a version byte, then a base64
JSON object that names the radio: rclass (BaofengUV5RGeneric), vendor, model (UV-5R), chirp_version. The
editor finds the marker anywhere in the file, searching from its end, and reads an image only when the model, class
and footer offset all match. Any other model is refused by its name. The UV-5R with another class (CHIRP's
DynamicRadioAlias, seen in one sample) is refused by that class: no CSV confirms its layout. A UV-5R footer at
another offset is refused as the wrong size (cut short).
Channels
128 channels, number n = 0 to 127.
| Offset | Size | Content |
|---|---|---|
| 0x0008 + 16 n | 4 | RX frequency: BCD, 10 Hz units, low digits first (00 25 27 46 = 462.725 MHz). All FF = channel unused |
| +4 | 4 | TX frequency, same coding. All FF = no transmit: read as receive only (below) |
| +8 | 2 | RX tone |
| +10 | 2 | TX tone |
| +12 | 2 | 0 in every sample |
| +14 | 1 | bit 0: low power (1.0 W; clear is 4.0 W) |
| +15 | 1 | bit 6: wide (clear is narrow); bit 2: in the scan list (clear is skipped) |
| 0x1008 + 16 n | 16 | Name, Latin-1, padded with FF |
Tone words: 0 or FFFF none; 600 to 3000 a CTCSS tone in tenths of a hertz (1035 = 0x040B = 103.5 Hz);
1 to 104 the DCS code at that place in the standard list (023, 025, ... 754). The samples confirm two places, 53 (311)
and 65 (411); the others assume the list's standard order. A tone-only channel has RX tone 0 and a TX tone; tone
squelch has both the same. Reversed DCS polarity is not in the sample and is not read.
A TX frequency of all FF with a valid RX frequency is in one sample (the alias class above, nine repeater channels),
with no CSV to confirm what CHIRP shows for it. The editor reads it as receive only: never as simplex, which would
transmit on the repeater's output.
Not read
Everything else: VFOs, the radio's settings, the second flag word of one channel in a later image.